Load data for .30 PICRA + .308 | 185gr | Lapua D46

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 185gr \| Lapua D46
Manufacturer SKU:	4PL7019 \| D46
Bullet Weight:	185gr \| 12.0g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.323" \| 33.6mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.442" \| 11.2mm
Shank Seated Depth:	0.206" \| 5.2mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B3162_C311
Last updated:	2025-01-01
Recommended Twist Rate:	1:11 - 1:9

Load data for 42 loads in caliber .30 PICRA with .308 | 185gr | Lapua D46 bullet and 21 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	73%	36230	89%	**12	100%
Accurate 4100	<<locked>>	72%	35041	86%	**84	93%
[Accurate No. 11 FS]*	<<locked>>	81%	35723	88%	**11	87%
Accurate TCM	<<locked>>	63%	36521	90%	**81	99%
Alliant 2400	<<locked>>	69%	35694	88%	**98	96%
Alliant BLUE DOT	<<locked>>	72%	36245	89%	**71	100%
Hodgdon H110	<<locked>>	77%	36071	89%	**27	91%
Hodgdon LilGun	<<locked>>	78%	35737	88%	**53	97%
Hodgdon TrailBoss	<<locked>>	94%	24932	61%	**1	100%
Maxam CSB 1	<<locked>>	63%	35404	87%	**4	100%
Ramshot Enforcer	<<locked>>	69%	35186	87%	**91	97%
ReloadSwiss RS 14	<<locked>>	95%	24656	61%	**7	100%
ReloadSwiss RS 30	<<locked>>	94%	36477	90%	**57	94%
SNPE Vectan BA6 1/2	<<locked>>	94%	34824	86%	**88	98%
SNPE Vectan BA7 1/2	<<locked>>	66%	35114	86%	**60	100%
[Somchem S265]*	<<locked>>	84%	35012	86%	**65	89%
Vihtavuori 3N38	<<locked>>	69%	36187	89%	**45	100%
Vihtavuori N105	<<locked>>	70%	34563	85%	**38	100%
Vihtavuori N110	<<locked>>	86%	35897	88%	**20	97%
Vihtavuori N32C Tin Star	<<locked>>	77%	35114	86%	**9	100%
[Winchester 296]*	<<locked>>	75%	34389	85%	**17	87%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26803	66%	**4	100%
[Accurate 4100]*	<<locked>>	61%	24091	59%	**20	87%
[Accurate No. 11 FS]*	<<locked>>	70%	24700	61%	**47	80%
Accurate TCM	<<locked>>	61%	34360	85%	**55	98%
Alliant 2400	<<locked>>	61%	27441	68%	**76	92%
Alliant BLUE DOT	<<locked>>	60%	25759	63%	**20	97%
[Hodgdon H110]*	<<locked>>	61%	21176	52%	**4	81%
[Hodgdon LilGun]*	<<locked>>	61%	19725	49%	**4	87%
Hodgdon TrailBoss	<<locked>>	66%	15171	37%	**9	100%
Maxam CSB 1	<<locked>>	60%	32561	80%	**5	100%
Ramshot Enforcer	<<locked>>	61%	27209	67%	**83	93%
ReloadSwiss RS 14	<<locked>>	67%	15214	37%	**9	100%
[ReloadSwiss RS 30]*	<<locked>>	72%	19653	48%	**1	81%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	14185	35%	**0	83%
SNPE Vectan BA7 1/2	<<locked>>	60%	30400	75%	**04	100%
[Somchem S265]*	<<locked>>	67%	21944	54%	**8	80%
Vihtavuori 3N38	<<locked>>	62%	29196	72%	**56	100%
Vihtavuori N105	<<locked>>	60%	25440	63%	**24	100%
[Vihtavuori N110]*	<<locked>>	61%	16882	42%	**2	84%
Vihtavuori N32C Tin Star	<<locked>>	62%	25324	62%	**7	100%
[Winchester 296]*	<<locked>>	66%	25338	62%	**83	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data